HYDRAULIC SYSTEM ARTICLES

Automotive Share |   HYDRAULIC SYSTEM ARTICLES | topbengkel.blogspot.com  ANALYSIS ON THE PANEL SYSTEM HYDRAULIC ASSEMBLY

IDENTIFICATION CHART WITH CIRCUITS

 Hydraulic system is a technology that memenfaatkan liquid, usually oil, to make a line ofmovement or rotation. This system works on the principle if a liquid substance subject topressure, the pressure will also include kesegala direction with no increases or decreasesits power. The principle of the hydraulic circuit is to use a working fluid in the form of liquiddisplaced by a hydraulic pump to run a particular system.

 To be able to work, the hydraulic system requires two sets of fundamentals that shouldterdesain with slick. By performing analysis on these two fundamental circuits and identifyeach component and its workflow, then the panel will be utilized hydraulic system further. In the sense that, it will be applied * with ease and understanding of the concept and designwork will be further developed.

 In a hydraulic circuit usually consists of actuators, the driving and working fluid in a systemthat works for a particular purpose. Where the components can be represented in a series of symbols. Hydraulic power can be divided into the power supply, power controller and thesystem works. Energy supplies parts used as energy converters and producers of pressure.Some components are used as energy are: Electric Motor, Motor combustion., ClutchPompaIndikator pressure, flow circuit manager.

 In the drive of the hydraulic system is a system that implements various parts of the workshift of a hydraulic machine. The energy put into the hydraulic fluid is used to createmovement or labor movement. This can be achieved by using various components ofcylinder actuators and motors 

 Direction control valve can be as a sensor, processor or controller actuator. The differencefunction is usually based on how the operation and depends on its location in the circuit.Moving the cylinder is one important consideration in the development of control systemsolutions. Energy ultimately delivered to the cylinders through the end of the element ordirection control valve. Direction of movement of the cylinder valve is controlled by apushbutton circuit to circuit development system.

  When posiisi normal oil pressure from the motor then go straight back ketangki (This circulation runs continuously during normal circumstances), if the button is pressed then thecylinder S1 maju.dan existing waste oil in the cylinder lamasuk to the tank. when the cylinderKaju until full then the flow of oil is from the motor directly to the valve and the actuator (if this pressure continues to occur then it will leak) so that the flow of oil will run to the check valve,check valve is functioning in an archive to a few bars of pressure then automatically kayubthis will be pushed so that flow directly ketangki (this check valve is a valve controls the flowatu). Vice versa with the cylinder backwards.